Aqua-Quad™ Tank Accessories
Get the full potential out of your rainwater tank with a complete range of pumps and accessories from Stratco. A wide range of pumps are available. The pump you choose will depend on the tank size, the requirements of the appliance that will feed from the tank, the diameter of the plumbing pipes and the pressure required.
 | Water Pump & Accessories
300 Watt, 20 L/min Pump (Incl. Pressure Switch)
400 Watt, 25 L/min Pump (Incl. Pressure Switch)
500 Watt, 70 L/min Pump (Incl. Automatic Mains Switch Over)
Pressure Switch Pump Installation Kit
Automatic Low Level Top Up System |
 | Tank Accessories
Adjustable Feet Kit - Standard (To suit Modular Tanks, Aqua Barrel Tanks & Standard Tank Stand - set of 4 & 6)
Adjustable Feet Kit - Heavy Duty (To suit Aqua Barrel Tanks & Standard Tank Stand - set of 4 & 6)
Factory Plug 50mm diameter for Modular Tank
Factory Fitted Flushing Plug
Extra Socket Fitted - Plain (To suit Modular Tanks) 1/2”, 3/4”, 1” & 2” Extra Socket Fitted - Corrugated (To suit Aqua-Barrel Tanks) 3/4” & 1” |
 | Rainwater Tank Tap
Screw Nosed Tap 1/2”
Screw Nosed Tap 3/4” |
Aqua-Quad™ Tank
Aqua-Quad Tanks provide the style of a round corrugated design, yet maximise their water holding capacity and the floor space they occupy through their square form. The Stratco Aqua-Quad Tank will fit neatly into corners and against walls, making it the perfect solution in situations where space is limited.
Aqua-Quad Tanks use Aquaplate steel, which has a protective food grade polymer coating on the interior surface. This provides clean, safe rainwater, and gives the tank a long life-span. To further protect the tank from the elements, the base has a second layer of Aquaplate steel, with the polymer side facing the ground.
Aqua-Quad Tanks can be placed on a suitable concrete slab, with best results achieved when bitumen saturated felt is laid between the tank and base.
Taps
Stratco Aqua-Quad Tanks are supplied with a 1” outlet and tap and have an inbuilt 300mm diameter filter that doubles as an inspection point when removed. Other options include a different sized outlet and tap.
Easy Maintenance
Below are a few simple tips to help you get the most out of your Stratco rainwater tank.
- When installing your tank, ensure it is on a level, solid base.
- Do not store the tank on its side.
- Flush the tank before use, this is very important when connecting a pump.
- Do not stand on the top of the tank as the lid is not designed to support weight.
- When attaching the tap, use thread tape on the tap fitting and do not over tighten it.
- While the inlet filter provided with your tank will stop sticks and leaf debris entering the tank, it is also important to ensure the runoff area to the tank is free of debris.
- Clean the gutters every two months, or more regularly if trees overhang the roof.
- Remove any sludge from inside the tank when necessary.
- Do not scrub or scratch the interior surface of the tank because it has a protective coating covering the walls.
- Stratco tanks are produced from the highest quality materials and will provide many years of service if the important recommendations set out in the Stratco ‘Selection, Use and Maintenance’ brochure are followed.
Use Stratco rainwater calculator to see how you can save up to 100,000 litres of water a year.
