Cyclonic Good Neighbour® Fencing Component & Accessories
Stratco has all the accessories you need to complete your Good Neighbour Cyclonic fence including; post caps, ball caps, and a full range of single and double gates.
Gates
Cyclonic Good Neighbour® Fencing
Cyclonic Good Neighbour Fencing is easy to install. Once the steel uprights are concreted into place, the sheets slip neatly between for final fixing. The modular nature of the fence offers total flexibility and panels can also be stepped to suit sloping land.
The panels are rollformed from steel using either Superdek® or Corrugated fence sheets. The panels are available in standard heights ranging from 1200mm, to 1800mm.
The Stratco Cyclonic Good Neighbour Fence has been tested to conform to the strength requirements for cyclonic areas. Post and footing sizes are based on calculations using design wind pressures determined in accordance with the relevant Australian standards.
Cyclonic Good Neighbour® Fencing Profiles
Superdek®
As a high tensile, steel profile sheet, Superdek is suitable for fencing applications because of its strength and its modern good looking appearance. The Superdek profile has been the number one fence sheet choice for Good Neighbour fencing for many years and will be around for many more.
Note: Cyclonic Heavy Duty panel option shown
Corrugated (CGI)
Commonly found throughout Australia, CGI is a versatile building material that has always been popular in domestic fencing. Its soft flowing lines complement both contemporary and colonial styled homes and make CGI an ideal fence as either a feature or a backdrop to your garden.
Note: Cyclonic Heavy Duty panel option shown
Cyclonic Good Neighbour® Fencing Technical Information
Region C
Column types
| Region | Category | Height |
| | 1200mm | 1500mm | 1800mm |
| C | 3 & 4 | 1 | 1 | 2 |
| C | 2.5 | 1 | 2 | 2 |
| C | 1 & 2 | 1 | 2 | 2 |
1. Standard Post (Standard Panels)
2. Standard post & 1 SHS 50x50x3.0mm Post with cap (Heavy Duty Panels) |
1. Cyclonic Standard Panels consist of:
- 2 Infill Sheets
- 2 Posts
- Top & bottom Track
- 18 Self drilling 10x16 tapping screws
- 18 Self drilling 10x25 tapping screws
- 1 Rivet
2. Cyclonic Heavy Duty Panels consist of:
- 2 Infill Sheets
- 2 Posts
- 1 SHS 50x50x3.0mm Post with cap
- Top & bottom Track
- 18 Self drilling 10x16 tapping screws
- 18 Self drilling 10x25 tapping screws
- 1 Rivet
Footing sizes (Diameter X Depth)
| Region | Category | Height |
| | 1200mm | 1500mm | 1800mm |
| C | 3 & 4 | 200 x 600 | 200x 700 | 200 x 700 |
| C | 2.5 | 200 x 600 | 200 x 700 | 200 x 800 |
| C | 1 & 2 | 200 x 600 | 200 x 700 | 200 x 800 |
| All footings are circular and suitable for firm natural sandy clay. Increase depth 100mm for compact sand. Minimum foundation bearing capacity to be 100kPa. |
Region D
Column types
| Region | Category | Height |
| | 900/1200mm | 1500mm | 1800mm |
| D | 2 | 1 | 2 | 3 |
| D | 2.5 | 1 | 2 | 3 |
| D | 3 | 1 | 2 | 3 |
1. Standard post & 1 RHS 75x50x3.0mm post
2. Standard post & 1 SHS 75x75x3.0mm post
3. Standard post and 1 RHS 100x50x4.0mm post |
Cyclonic Standard Panels consist of:
- 2 Infill Sheets
- 2 Standard posts & RHS/SHS posts
- Top & bottom track
- Top & bottom fence track stiffeners
- 16 10x25 self drilling &tapping screws
- 7 14x22 self drilling &tapping screws
- Rivets
Footing sizes (Diameter X Depth)
| Region | Height |
| | 900/1200mm | 1500mm | 1800mm |
| D | 300 x 1200 | 300 x 1250 | 300 x 1400 |
| All footings are circular and suitable for firm natural sandy clay. Increase depth 100mm for compact sand. Minimum foundation bearing capacity to be 100kPa. |
Note: Deemed to comply drawing number M/802/3. Darwin Building Board approved.
